Bridal Archway – By Glenda @ Edmonton Store

What You Will Need

View full article →

Tissue Tassel Fun – By Megan @ Calgary Store

  

 

  

 

 

 

 

 

Here’s what you will need

Different Colors of Tissue paper in 20x30 Sheets

Scissors

Satin, or Grosgrain Ribbon

 

Here’s what you’ll do

Take one sheet of tissue, and fold it in half

On the open side cut strips up, leaving about 3 inches to the fold

Open the sheet

Starting in the middle of the sheet, begin to roll the tissue so the cut portions are on the outside, and you are rolling the uncut portion

Once you finish rolling you have a single tassel

Twist the top so that you have a hole like the last picture

Slide your ribbon through the hole with multiple tassels and you know have a tassel banner! 

SOS Flower - by Glenda @ Edmonton Store

  

  

What You Will Need

What You Will Do

Cut the bottom off the bags at the fold. Draw a petal shape on 1 of each size bag. Stack the bags and cut out the petals. Fold a crease lengthwise on each petal for definition. Using a hot glue gun, glue the larger petals, overlapping the points at the center. Do the same with the smaller petals, gluing to the center of the larger flower. Stagger the small petals and hold them up a bit until the glue sets.  Cut a small square of jewel ribbon and glue to the center of each flower.

February 26, 2015

0 Comments

Bride Event › DIY › themes ›


Destination Box Kit For Brides - By Erin @ Calgary Store

 www.creativepackaging.ca

Destination Box Kit for Brides

(Décor, Favours, and Centrepieces)

What you will need 

19x12x3 White Apparel Box

Tulle Ribbon, Faux Jewel Ribbon (DÉCOR)

Trendy Bag Table Centrepiece Kit – See Blog for instructions (CENTERPIECE )

Napkins (DÉCOR)

Gifting Tags (FAVOURS)

Candy (FAVOURS)

PP Gusset White Dot 1 LB Bags (FAVOURS)

Pretty Ribbon to match (FAVOURS)

Scissors

Tape

  

   

  

What to do 

Take all the supplies you need for your wedding and slide them into your white kit box, 

Centrepieces- See our Trendy Bag Centrepieces for your table Decor

Tulle, and Faux diamond bling ribbon for back of chairs for Bows

Candy, Candy Bags, Tags for your favours

Straws, Napkins for fun 

Now when you arrive at your destination you wont have to go locally search for these fun, trendy, colourful décor items, YOU HAVE THEM!

February 26, 2015

0 Comments

Bride Event › DIY › themes ›


Favours on the Fly – By Erin @ Calgary Store

 

 www.creativepackaging.ca

Favours on the Fly – Created by Erin, In Calgary

What you will need

 A bag of M and m’s

Confectionary, Candy bag  with white Dots

A pair of scissors

Ribbon

Cute blank tags 

What to do

 

Supplies – Pick any candy you love for your candy bag favour. Cut a piece of ribbon to start at 25 inches per bag of Candy.

  

Take your candy, and slide it into your individual candy bag. Close the top with a piece of ribbon. Either tie your ribbon into a shoelace bow, or just a knot. Using the end of your ribbon, slide your handwritten tag on, and pull the tag to the knot. 

You now have favours on the fly!

February 26, 2015

0 Comments

Bride Event › DIY › themes ›


Destination Hotel Bag Idea - By Erin @ Calgary Store

 www.creativepackaging.ca

Destination Bags for Hotel Rooms

What you will need

Small White bag, 5x8 inches tall with a handle

Items your guests could use such as band-aids, suntan lotion, mouthwash, q-tips, a bottle of water

Pretty Ribbon

Blank tag to write a message on

Scissors 

What to do 

Using your small bag, put the items you think your guests at your destination wedding would like. Such as, Toothbrushes, Flip-flops, Mouthwash, Snacks, Tylenol, Water Bottles. When you are finished loading your bag up, don’t forget to add a list of phone numbers of other guests, and their room numbers so they can find each other! 

Embellish your bag by tying on your blank tag with a message, and your ribbons. You can use a simple shoelace bow to attach the ribbon to the handle! 

Then have the hotel desk put these fun treat bags into your guest's rooms, how happy they will be with a wonderful VIP surprise bag just for them.

February 26, 2015

0 Comments

Bride Event › DIY › themes ›


Ribbon Arch Way - By Erin @ Calgary Store

 

www.creativepackaging.ca

Ribbon Arch Way – By Erin, Creative Packaging –Calgary

What you will need 

35 strands of 80 inch ribbon, depending on what type of ribbon you use, in this example we used a one inch satin ribbon in white, and ivory tones

Large Silver tags to use as a seating chart, or for guests to write a message on

Fishing wire, wooden dowel, or very thin ribbon to hold your arch of 80 inch ribbon strands

Stapler

Glue dots to attach tags to ribbon

Scissors to cut ribbon  strands

   

What to do 

Using your scissors cut your ribbon from your roll i 80 inch strips of ribbon, you will need 35 pieces at least.

  

Next take your 80 inch strands of ribbon, and tie them on to your wooden dowel, or wire about an inch apart.

 

 Here is an example of using a ribbon to hold your strands of 80 inch ribbon. 

Once all your strands are attached find a great place to hang your ribbon arch for your wedding guests.  It makes a great back drop for Photography, or even simply décor.

  

After hanging up your ribbon arch, you can take your silver tags and either attach the cards to the ribbon directly with a glue dot, or you can lay the tags out with a pen for your guests to write a special message to you. Then later they can be attached for all the guests to read. 

 The ribbon hanging down to the floor once placed hanging up 

 

 Hand written messages as an example 

Finished looks in our CALGARY Store

  

 

February 26, 2015

0 Comments

Bride Event › DIY › themes ›


Popcorn Snacks Made Easy - By Erin @ Calgary Store

       www.creativepackaging.ca

Popcorn Snacks – By Erin, Creative Packaging –Calgary

What you will need 

Different flavors of popcorn

Paper Eskimo Baking cups 

What to do

 

Decide what kind of popcorn you want, then take it by a handful and drop it in each cup. 

Now you have adorable snacks for all your guests without fuss, they can snack on different kinds of popcorn through out the event,

February 26, 2015

0 Comments

Bride Event › DIY › themes ›


Marshmallow Favor Treat - By Erin @ Calgary Store

 www.creativepackaging.ca

Marshmallow Favor Treat – By Erin, Creative Packaging – Calgary

What you will need

Marshmallows - Regular Sized

Retro Straws

Satin Ribbon

Scissors 

What to do

 

 

Take the retro straw and poke it through the marshmallow. Stand it up. Then cut a 15 inch piece of ribbon and tie it in a shoe lace bow on the top of the retro straw. How fun to have a marshmallow on a stick? Looks super pretty, and super easy to make. 

Optional –  Drizzle Chocolate on the marshmallow,  and /or dip in nuts that it can be dipped into for extra toppings